• LS type water-cooled Roots vacuum pump
LS type water-cooled Roots vacuum pump
+

LS type water-cooled Roots vacuum pump


LS type direct exhaust wet Roots vacuum pump is a rough vacuum acquisition equipment, suitable for vacuum drying, vacuum dehydration, vacuum extraction, vacuum degassing in power, chemical, food, papermaking, pharmaceutical, textile and other industrial sectors, suitable for clean, oil-free vacuum systems and pumping processes with a large amount of water and water vapor overflow, especially suitable for vacuum filtration in coal washing plants and ore dressing plants. This type of pump can be used to obtain vacuum, but also as a blower, so it can be used for vacuum collection and pneumatic conveying.
Online Consultation

Detailed Introduction

LS type direct exhaust wet Roots vacuum pump is a rough vacuum acquisition equipment, suitable for vacuum drying, vacuum dehydration, vacuum extraction, and vacuum degassing in industrial sectors such as power, chemical, food, papermaking, pharmaceutical, and textile. It is suitable for clean, oil-free vacuum systems and pumping processes with a large amount of water and water vapor overflow, especially suitable for vacuum filtration in coal washing plants and ore dressing plants. This type of pump can be used to obtain a vacuum and also as a blower, so it can be used for vacuum collection and pneumatic conveying.

Features:

• Compared with commonly used water ring pumps, this type of pump has the advantages of low power consumption and less cooling water required.

• When the working pressure is 1000HPa-410HPa (i.e., -10mmHg--450mmHg), it is recommended to use a single LS type pump. When the working pressure is 410HPa-40HPa (i.e., -450mmHg--730mmHg), it is recommended to use two LS type pumps in series. In this way, the energy-saving effect will be more obvious, reaching 30%-40%.

• During use, allowing a small amount of sealing water to enter the intake has a significant effect on improving efficiency, lowering temperature, and reducing noise.

• Beautiful and exquisite appearance.

• New processing technology is adopted, and the manufacturing and configuration of various components are more reasonable.

• Simple structure, easy to use, and easy to maintain.

 


Curve Chart


Technical Parameters

Model Pumping rate Ultimate pressure Rated pressure Inlet and outlet diameter Cooling water flow rate Matching power
m³/min Pa Torr Pa  Torr mm L/min Working pressure
<400hpa
Working pressure
>400hpa
LS-9 1.5x10⁴ 110  4*10⁴ 300  150  15  11 
LS-12 12  150  18.5  15 
LS-15 15  150  10  22  18.5 
LS-20 20  150  12  30  22 
LS-30 30  200  18  45  37 
LS-40 40  200  18  75  45 
LS-6 60  250  22  110  75 

Keywords:

LG/LGB series dry screw vacuum pumps

Roots Vacuum Pump Series

H, 2H slide valve vacuum pump series

Liquid ring vacuum pump series

Oil-free reciprocating vacuum pump series

KT series high vacuum oil diffusion pump series

Z-series oil diffusion jet pump (oil booster pump)

Vacuum unit series

Related Products

Leave a Message

You can consult us on any questions, and our customer service staff will give you a professional reply!(* is required)

Submit Message
%{tishi_zhanwei}%